23
RECOMMENDED BRUSHES
Brushes must be chosen depending on type of floor and dirt to be removed. The employed ma-
terial and the bristles diameter are the elements that distinguish different types of brushes.
MATERIAL CHARACTERISTICS
PPL (Polypropylene) Good wear resistance. Maintains characteristics with hot water up to
140°F (60°C). It is not hygroscopic.
NYLON Excellent wear resistance, even with hot water over 140°F (60°C). It is hygroscopic. It
looses its physical characteristics over the time.
TYNEX Nylon bristles with grains of abrasive material. Use with caution in order not to mark the
floor or ruin the polishing.
BRISTLES THICKNESS Thicker bristles are more rigid and must be used on smooth floor or
floor with small joints. On irregular floors with deep joints or relieves, it is recommended to use
softer bristles which penetrate more easily and deeper. Please be aware that when brush bris-
tles are worn out and therefore too small, they become rigid and unable to penetrate and clean
deeper. This may also happen with thicker bristles creating brush vibration.
CODE
QTY DESCRIPTION
USE
48906020
2
Cylindrical brush PPL 0,7 Ø (6” x 26”)
(150 x 800)
Smooth floors with small joints and
persistent dirt.
48906060
2
Cylindrical brush PPL 1 Ø (6” x 26”)
Floors of resistant material and par-
ticularly dirty.
48906080
2
Cylindrical brush TYNEX Ø (6” x 26”)
Floors of resistant material and par-
ticularly dirty.
48906100
2
Cylindrical brush PPL 0,3 Ø (6” x 26”)
Smooth floors with small joints and
persistent dirt.
