16
6. Pressing the accelerator
pedal, the machine begins to
move and in automatic mode
all the working functions
are activated. Automatically
both the brushes base and
the squeegee go down, the
brushes begin to turn, the
solenoid valve opens to permit
the detergent solution to flow
down onto the brushes and
the suction system is activated
to recover the dirty water from
the floor.
Move the selector backwards
(1) to choose the reverse
drive and pressing the
accelerator pedal the reverse
drive starts, the squeegee
lifts automatically and will
then lower itself during the
next forward movement. If
the accelerator pedal is
released for more than 3
seconds, automatically all
the functions are switched off
and both the brushes base
and the squeegee are lifted.
Pressing the pedal again,
the machine starts to move
again and in automatic mode
all the working functions are
reactivated.
ATTENTION:
The washing and drying
functions, when they are not
carried out simultaneously,
represent an improper use
of the machine (see under
paragraph “GENERAL RULES
OF SECURITY”). If they are
carried out separately, it
is necessary to forbid the
working areas to the passage
of non-authorized personnel
and to signal the areas of
moist floors with suitable
signs.
1. Activate the machine (see
under paragraph “STARTING
OF THE MACHINE”).
WORKING IN MANUAL
MODE
The manual mode is useful
when, in special cases, it
is necessary to carry out
separately only the washing
with the brushes or only the
drying of the floor.
2. Pressing the push button
(2) the functioning of manual
(MAN) mode is chosen. When
the signal lamp (1) is on, then
the machine is functioning in
manual (MAN) mode.
TO CARRY OUT THE
WASHING WITH ONLY THE
BRUSHES:
1. Check that the knob of
the solution valve (8) is in
the position of optimum
flow, depending on the type
of floor and the type of dirt
(see under the paragraph
“FLOW ADJUSTMENT OF THE
DETERGENT SOLUTION”).
2. Press the push button (6) of
up/down of the brushes base
to lower the brushes.
Once it is lowered, the brushes
begin to turn. The blinking
signal lamp (7) indicates that
the brushes base is lowering
or lifting (it remains on when
the brushes base is in working
position), while the signal lamp
(5) signals that the brushes are
turning.
3. Press the switch (4) to open
the solenoid valve and permit
the detergent solution to
lower onto the brushes. The
signal lamp (3) will come on,
to indicate that the solenoid
valve is open.
TO CARRY OUT THE
FUNCTION OF ONLY DRYING:
1. Press the push button (14)
of up/down squeegee to lower
the squeegee. The blinking
signal lamp (13) indicates
that the squeegee is lowering
or lifting (it remains on when
the squeegee is in working
position).
2. Press the switch (12) of
the suction motor to start the
suction system. The signal
lamp (11 indicates that the
machine is drying.
Position the selector (9)
forward to choose the forward
drive. Adjust the movement
speed in forward with the
push button (10) (see under
paragraph "FORWARD AND
BACKWARD MOVEMENT”).
Pressing the accelerator
pedal, the machine begins
to move forward and to work
according to the set functions.
