14
Always use low foam
detergent. To avoid foaming,
before starting operations,
introduce into the recovery
tank a minimum quantity of
anti-foam product. Never use
pure acid.
ATTENTION:
5. Pressing the push button
(8) the automatic (AUTO)
functioning is chosen, while
pressing the push button (5),
the functioning of the machine
becomes manual (MAN).
A. When the signal lamp (9) is
on, the machine is functioning
in automatic (AUTO) mode
and the machine activates and
deactivates all the working
functions in an automatic
mode (see under paragraph
“WORKING IN AUTOMATIC
MODE”).
B. When the signal lamp (4) is
on, the machine is functioning
in manual (MAN) mode and it
is possible to choose if:
I. To carry out the only transfer
of the machine without
activating or deactivating the
working functions.
II. To activate separately only
the controls relative to the
washing function with the
brushes (see under paragraph
“WORKING IN MANUAL
MODE”).
III. To activate separately
only the controls relative
to the drying function with
the squeegee (see under
paragraph “WORKING IN
MANUAL MODE”).
STARTING THE MACHINE
A safety device avoids the
machine’s movement if
the operator is not seated
correctly on the guiding place.
To switch on the machine:
1. Sit on the seat.
2. Turn the key switch (1)
clockwise to switch on the
machine. Automatically, the
machine gets ready in manual
(MAN) mode and in forward
movement with the fast speed
(signal lamp 2).
3. Check the charge level of
the batteries on the display (3).
4. Pressing the push button
(7) the functioning of BREAK
WASHING is chosen and
the transfer operations of
the machine are carried
out (see under paragraph
“FORWARD AND BACKWARD
MOVEMENT"). When the
signal lamp (6) is on, then
the machine is in BREAK
WASHING mode.
ATTENTION:
In manual mode every
function of the machine has
to be activated or deactivated
manually.
FORWARD AND BACKWARD
MOVEMENT
It is recommended to always
carry out the mere transfer of
the machine in mode (BREAK
WASHING).
To proceed to activate the
movement of the machine:
1. Sit on the seat.
2. Turn the key switch (1)
clockwise to switch on the
machine.
3. Check the charge level of
the batteries on the display (5).
4. Pressing the push button
(7) the functioning of BREAK
WASHING is chosen to carry
out the mere transfer of
the machine. In fact, in this
mode the washing functions
of the machine are not
working and only the traction
system functions. When the
signal lamp (6) is on, then
the machine is in BREAK
WASHING mode.
5. Positioning the selector
(8) forward, the forward drive
is chosen, while positioning
it back, the reverse drive is
chosen.
6. Press the accelerator pedal
placed on the right part of the
platform to start the machine.
7. Adjust the movement speed
in forward pressing by push
button (2) to choose the slow
one (at the maximum 1.9 mph
(3,6 km/h) is reached) or the
fast one (at the maximum 3.1
mph (5 km/h) is reached). The
signal lamp (3) indicates that
the fast drive is selected, while
signal lamp (4) indicates that
the slow drive is selected.
8. In backward movement,
when the machine is moving,
an intermittent warning device
is activated.
