Tormach Autofeed Bandsaw AF50, Operator'S Manual

Page: 5 / 90

©Tormach® 2020
Specifications subject to change without notice. Page 5 UM10538: Tormach AF50 Autofeed Bandsaw (Version 0320A)
For the most recent version, see tormach.com/support
TABLE OF CONTENTS
10.5 Adjust the Jaws 47
10.5.1 Align the Fixed Jaw 47
10.5.2 Adjust the Fixed Clamp Jaw 47
TROUBLESHOOTING 49
11.1 Operations Troubleshooting 50
11.1.1 Blades Break Too Frequently 51
11.1.2 Blades Dull Too Quickly 53
11.1.3 Blades Lose Teeth 54
11.1.4 Cuts Are Crooked 55
11.1.5 Material Doesn't Advance 56
11.1.6 Material Slips in Vise Clamps 57
11.1.7 Noise or Problems Moving Through the Cut 58
11.2 Motor and Electrical Troubleshooting 59
11.2.1 Coolant Pump Doesn't Work 60
11.2.2 Error on the Control Panel 62
Control Panel Displays CS 62
Control Panel Displays E** 62
Bandsaw Error Codes Reference 62
11.2.3 Machine Doesn't Start or a Panel Breaker Trips 64
11.2.4 Machine Stalls or It's Underpowered 65
11.2.5 Noise or Machine Vibration 67
DIAGRAMS AND PARTS LISTS 69
12.1 Base Casting Exploded View 70
12.2 Base Casting Parts List 71
12.3 Head Casting Exploded View 73
12.4 Head Casting Parts List 74
12.5 Infeed Table Exploded View 77
12.6 Infeed Table Parts List 78
12.7 Stand Exploded View 80
12.8 Stand Parts List 81
PNEUMATIC SCHEMATICS 83
13.1 Bandsaw Pneumatics 84
ELECTRICAL SCHEMATICS 85
14.1 115 Vac Power 86
14.2 Controls and Sensors 87
14.3 Terminal Strips 88
14.4 Electrical Panel Layout 89