Torc Mojave, Warranty & Instructions, Page: 5 / 24

6
REMOVING LENS:
•
Hold the frame at the bottom and grab the top of the frame from the
inside. Gently pull the top of the frame from the lens, to disengage the lens
notches from the frame posts.
•
Once the top of the lens is separated from the frame, gently pull the lens
out of the sides and the bottom of the frame.
INSERTING LENS:
•
Start by inserting the lens at the nose, align the notches on the lens with
the posts of the frame, make sure the lens is lined up with the groove of the
frame. Once lined up, push the lens onto the posts.
•
I nsert the lens on each side of the frame. Make sure that the lens is
pushed completely into the groove of the frame.
•
At the top of the frame, align the notches on the lens with the posts on the
frame. Make sure the lens is lined up with groove of the frame. Once it is
lined up, push the lens onto the posts.
•
Check the lens to make sure that it is correctly and fully inserted into the
lens slot and that all lens notches are properly engaged with the appropriate
frame posts.
•
Peel the protective backing from the inside of the lens.