Outdoor Dome Series | Quick Guide
13
Note
Please properly lock the screw hole plug on either hole. For example, lock the side conduit
hole with the plug while using the bottom conduit hole for cable entry and vice versa.
Keeping tilt angel over 17 degrees is recommended when IR-LED light is used. If tilt
angel is below 17 degrees from the horizontal, the image would be flashed by the
reflection of IR-LED light.
Method 3:
To surface mount with junction box
Figure 2 - 7: Mounting the Camera 5/5
Tighten the bottom case
to the junction box with
screws supplied.
Align the bottom case,
lens base and camera
housing in order by the
respective red dot for
precise mounting
A101DORV / A301DORV
A301DORZ / A501DORZ
Tighten the bottom case
to the junction box with
screws supplied.
Align the bottom case,
lens base and camera
housing in order by the
respective red dot for
precise mounting
