Outdoor Dome Series | Quick Guide
16
2.2.6 Adjusting Zoom and Focus
(A101DORV / A301DORV Series Exclusive)
Figure 2 - 11: Zoom and Focus Control
Loosen the zoom lever / locking screw (D) by turning counter-clockwise. Rotate the zoom ring to adjust the zoom.
Loosen the focus lever / locking screw (E) by turning counter-clockwise. Rotate the focus ring to adjust the focus.
Repeat the above steps if any readjustment is required.
When finished, be sure to retighten the zoom lever / locking screw (D) and the focus lever / locking screw (E).
Note
For A301DORZ / A501DORZ Series, users can adjust focus to perfection through the
configuration in the UI menu. Refer to
“Remote Lens Control” for more details.
Retighten the 2 locking screws to prevent readjustments.
2.2.7 Locking the camera
Use soft, lint -free cloth to wipe the dome cover and remove fingerprints. Tighten the 3 screws to secure the
lens base with the bottom case. And attach camera housing with securing the 3 screws of camera housing.
Turn the power on after you have well mounted the whole unit.
D
E
