Module Type
Cell Type
Cell
Alignment
Dimensions
A*B*C (mm)
E*F/D*F (mm)
Cable Length
G (mm)
Frame
Dimension
H*C*I (mm)
TPSM5U(72)
Mono-crystalline
6* 12
1581*809*35
801*758/1301*758
9
00
11*35*27
TPSM6U(60)
Mono-crystalline
6* 10
16
40
*99
2
*40
860
*9
54
/1360*9
54
9
00
11*40*27
TPSM6U(72)
Mono-crystalline
6*12
19
56
*99
2
*50
9
56
*9
41
/1476*
941
9
00
12*50*35
TPSP6U(60)
Poly-crystalline
6*10
1640*99
2
*40
860*954/1360*9
54 9
00
11*40*27
TPSP6U(72)
Poly-crystalline
6*12
1956*99
2
*50
956*941/1476*9
41
9
00
12*50*35
Table 1. Module Mechanical Dimensions
Topray Solar crystalline solar modules can be mounted by using the following methods:
- Modules can be mounted by using moun ng holes at the module frame with corrosion-proof screws.
- Modules can be mounted by using suitable module clamps on the long side of the module frame.
- Modules can be mounted by using suitable module clamps on the short side of the module frame.
Pleased be noted that Topray solar will not provide related BOS components, the system installer or trained professional
personnel must be responsible for the PV system’s design, inst
system.
A)
Module installed with moun ng holes
The frame of each module has 8
ng holes (Length* Width: 14mm*9mm) used
rail using M8 corrosion-proof screws together with spring
washers and
ŇĂƚ
washers. Use 4 or 8 symmetrical moun ng holes on the module for di
ī
erent loads as pointed by the red
on as shown in Figure 3 as following:
6
Summary of Contents for TPSM5U
Page 1: ......