M200
8
instructions for installation
SLIDING PULLING ARM INSTALLATION
COMPONENTS
1- Cover, plastic cover plates and 4 fixing screws
2- Automation M200
3- Fixing plate
4- Automation fitting nuts
5- Sliding arm and extractor cap *
6- Axle extension and
corresponding screw (optional) *
* Supplied separately
Automation positioning with left hinge
Pay attention to the orientation of the fixing plate,
to the door edge and the axis of rotation of the door
Automation positioning with right hinge
Pay attention to the orientation of the fixing plate,
to the door edge and the axis of rotation of the door
11
2
3
4
door edge
fixing plate
door edge
fixing plate
automation external dimensions
automation external dimensions
standard 3S1100
3S1101
3S1102
A
(mm)
55
80
105
130
3S1020
B
(mm)
0 - 30
standard 3S1100
3S1101
3S1102
A
(mm)
55
80
105
130
3S1020
B
(mm)
0 - 30
The automation must be fixed on the side of the hinges.
The distance «A» varies according to the type of the Axls
extension used. See the table.
The automation must be fixed on the side of the hinges.
The distance «A» varies according to the type of the
Axls extension used. See the table.
Summary of Contents for M200
Page 20: ...M200 20 instructions for installation LIST OF ERROR MESSAGES AND NOTICES ...
Page 28: ...M200 28 instructions for installation EC DECLARATION OF INCORPORATION ...
Page 29: ...29 instructions for installation M200 ...
Page 30: ...M200 30 instructions for installation ...