TOPP M200, Instructions For Installation And Use Manual

Page: 10 / 32

M200
10
instructions for installation
SLIDING PULLING ARM INSTALLATION - ELBOW
COMPONENTS
1- Cover, plastic cover plates and 4 fixing screws
2- Automation M200
3- Fixing plate
4- Automation fitting nuts
5- Sliding elbow arm and extractor cap *
6- Axle extension and
corresponding screw (optional) *
* Supplied separately
Automation positioning with left hinge
Pay attention to the orientation of the fixing plate, to the door
edge and the axis of rotation of the door
Automation positioning with right hinge
Pay attention to the orientation of the fixing plate,
to the door edge and the axis of rotation of the door
11
2
3
4
The automation must be fixed
on the side of the hinges. The
distance «A» varies according
to the type of the Axls exten -
sion used. See the table.
door edge
fixing plate
door edge
fixing plate
automation external dimensions
automation external dimensions
C
C
3S1030 3S1031
B
(mm)
0 - 100 101 - 200
C
(mm)
107,5 277
standard 3S1100 3S1101 3S1102
A
(mm)
70 mm 95 mm 120 mm 145 mm
3S1030 3S1031
B
(mm)
0 - 100 101 - 220
C
(mm)
107,5 277
standard 3S1100 3S1101 3S1102
A
(mm)
70 mm 95 mm 120 mm 145 mm
The automation must be fixed
on the side of the hinges. The
distance «A» varies according
to the type of the Axls exten -
sion used. See the table.