AUX RETURNS
4
CH4
CH3
CH1
CH2
3
AUX SENDS
L
L
4
3
R
R
1
2
L
L
1
2
R
R
PHANTOM
POWER
DIRECT OUTS (BAL/UNBAL)
ON
OFF
USB
RECORD
PLAY BACK
L
CTRL OUT
MONO
R
(BAL/UNBAL)
+15
-
8
0
4
SUBGROUPS OUT
3
2
1
4
3
2
1
SUBGROUPS INSERT
SUB
1/2
CH
15/16
MAIN
MIX.
MAIN
MIX.
AC INPUT
100-240V 50/60Hz
RATED POWER CONSUMPTION: 50W
Fuse: T1.25AL AC250V
SERIAL
MODEL
MADE IN CHINA
Use only with a 250V fuse
B
PHONES
A
L
TAPE IN
R
TAPE OUT
2-TRACK IN OUT
INSERT
INSERT
MAIN MIX
OUTPUT L
MAIN MIX
OUTPUT R
5V
0.5A
LAMP
BAL UNBAL
BAL UNBAL
16-CH COMPACT INTEGRATED LIVE
SOUND MIXER
MX1642
1
2
3
1
2
3
40
39
42
CONTROL ELEMENTS
-TAPE IN
Use the Tape input if you wish to listen
to your mix from a Tape Recorder or DAT.
- TAPE OUT
These RCA jacks will route the main mix
into a tape recorder.
38- 2-TRACK IN/OUT
These jacks will be used to send the signal to a pair of headphone or to
powered studio monitors.
40- PHONES Jacks
39- USB LAMP socket
This lovable LAMP is very convenient
for your operati-on, it is located in the
top right corner of the front panel, and
provides the 5V socket that can drive
standard USB-type lamp.
42- MAIN INSERT
These two 1/4" phone jacks are stereo insert points and used to connect
processors such as compressors, equalisers etc.. When insert a external
processor into the jack, the Main stereo signal will be taken out after the
EQ and returned into the MAIN MIX output before the MAIN MIX fader.
41- MAIN MIX OUTPUT
These stereo outputs are supplied with both the XLR and 1/4" phone jacks
and it is controlled by the Main Mix Level.
41
37- MAIN MIX LEVEL Fader
This fader sets the amount of signal send either to the Main Mix Output or
to the Tape Output.
38
CONTROL ELEMENTS
REAR PANEL
This switch is used to turn the main power on and off.
43- POWER Switch
44- +48 Volt Phantom Power Switch
It is available only to the XLR MIC sockets. Never plug in a microphone when
phantom power is already on. Before turning phantom power on, make sure
that all faders are totally down. In this way, you will protect your stage
monitors and main loudspeakers.
Use it to connect your MX1642 to the main AC with the supplied AC cord.
Please check the voltage available in your country and how the voltage for
your MX1642 is configured before attempting to connect your MX1642 to
the main AC.
45- AC Inlet with FUSE Holder
56
54
43 44
46 47 48
45
51
50
49
52
53
55
46- USB PORT
This USB port is used to connect the unit to PC with a transmission line.
When it is in output mode, it can connect with the SUB1-2 or MAIN MIX
output; in the input mode, it can connect with the CH15/16 or MAIN MIX
output.
47- USB RECORD Switch
You can select SUB1/2 or MAIN MIX track to input the record signal to PC.
48- USB PLAYBACK Switch
You can select CH15/16 or MAIN MIX track to output the audio signal from PC.
MIX
MIX
4
4
11
12
