This is the fastest way to get something out from your MX1642, if you
have a keyboard and a microphone.
a. Plug the microphone into Channel 1 MIC IN.
b. Turn down AUX and LEVEL controls on the input channel.
c. Put the EQ controls on center position.
d. Turn on your MX1642.
f. If you like, you can adjust the EQ at this stage.
g. The LED on the Master LED meter should flash only occasionally, otherwise
you will hear distortion. If this LED is not active and you still hear distortion,
please turn down a little the input LEVEL control or reduce the output level
of your source instrument.
h. Connect your stereo keyboard into one of the s
channel of your
MX1642
tereo line inputs
Here you are. It is your first GIG with your MX1642.
QUICK START
Sing or speak into the microphone with normal volume and adjust the channel
LEVEL control to half.
e.
Sleeve=Ground/Screen
Tip=Signal
Sleeve=Ground/Screen
Ring=Return Signal (Connected together)
To Channel Insert
To Tape or FX Input
"Tapped" Connection Direct Output Lead
(Enables the Insert to be used as a Direct Output
while maintaining the channel signal flow)
Sleeve
Sleeve=Ground/Screen
Ring=Return Signal
Tip=Send Signal
To Channel Insert
To Processor Input
To Processor Output
Ring
Tip
Y-Stereo lead for insert Connection
(To be used when the processor does not employ a
single jack connection for the In/Out Connections)
USB Connection
INSTALLATION AND CONNECTION
MIX
MIX
6
3
3
20
