9
3. Mounting table assembly
Remove the D-nut, washers, and wing screw on the saw
table.
Slide the saw table
past the blade and through the slot moving to the frame, pulling the
angle adjustment knob away
from the saw frame, Align
the teeth on the saw table bracket into the teeth on the
angle adjustment knob. Release the
knob.
Fit the pins on the frame into the slots of the saw table
bracket.
Assemble the flat washer and table lock
handle. Tighten the saw
table to the saw frame by turning
the table lock lever clockwise.
Attach the D-nut, washers, and wing screw to the saw
table.
4. Secure the hook with M6 hex nut to the frame.
Place push stick onto the hook
The hook and push stick are alternative assembly parts.
Your machine may not have these parts.
Wing screw
Hook
D-nut
Table lock handle
Angle adjustment knob
Push stick