4
If devices are provided for the connection for dust extraction and collection facilities ensure these are connected and
properly used.
11. Do not abuse the cord.
Never carry the tool by the cord of yank it to disconnect it from the socket, Keep the cord away from heat, oil and sharp
edges.
12. Use a push stick.
Use a push stick to feed the workpieces. It is safer than using your hand.
13. Do not overreach.
Keep proper footing and balance at all times.
14. Maintain tools with care.
Keep cutting tools sharp and clean for better and safer performance. Follow instructions for lubrication and changing
accessories. Inspect tool cord periodically and if damaged have it repaired by an authorized service facility. Inspect
extension cords periodically and replace, if damaged. Keep handles dry, clean and free from oil and grease.
15. Disconnect tools.
When not in use, before servicing and changing accessories such as blades, bits and cutters, disconnect tools.
16. Remove adjusting keys and wrenches.
Form the habit of checking to see that keys and adjusting wrenches are removed from the tool before turning it on.
17. Avoid unintentional starting.
Do not carry a plugged-in tool with a finger on the switch. Ensure switch is off when plugging in.
18. Use outdoor extension leads.
When tool is used outdoors, use only extension cords intended for outdoor use.
19. Stay alert.
Watch what you are doing. Use common sense. Do not operate tool when you are tired.
20. Check damaged parts.
Before further use of tool, a guard or other part that is damaged should be carefully checked to determine that it will
operate properly and perform its intended function. Check for alignment of moving parts, free running of moving parts,
breakage of parts, mounting and any other conditions that may should be properly repaired or replaced by an authorized
service center unless otherwise indicated in this instruction manual. Have defective switches replaced by an authorized
service facility. Do not use the tool if the switch does not turn it on and off.
21. Warning.
The use of any accessory or attachment, other than those recommended in this instruction manual or the catalog, ,may
present a risk of personal injury.
22. Have your tool repaired by a qualified person.
This electric tool is in accordance with the relevant safety requirements, Repairs should only be carried out by qualified
persons using original spare parts, otherwise this may result in considerable danger to the user.
ADDITIONAL SATETY RULES FOR TOOL
SAVE THESE INSTRUCTIONS
1. Wear dye protection
2. Do not use the tool in presence of flammable liquids or gases
3. Always use face or dust mask.
4. Check the blade carefully for cracks or damage before operation. Replace cracked or damaged blade
immediately.
5. Use only saw blades recommended by the manufacturer and which conform to the stand of your country.
6. Always use accessories recommended in this manual. Use of improper accessories such as abrasive cut-off
wheels may cause in injury.