6
WARNING:
Improper connection of equipment grounding conductor can result in the risk of electrical shock. equipment
should be grounded while in use to protect operator from electrical shock.
-Check with a qualified electrician if you do not understand grounding instructions or if you are in doubt as to whether the tool
is properly grounded.
-This tool is equipped with an approved cord and a 3-prong grounding type plug for you protection against shock hazards.
-Grounding plug should be plugged directly into a properly installed and grounded 3-prong grounding-type receptacle, as
shown.
-Do not remove or alter grounding prong in any manner. in the event of a malfunction or breakdown, grounding provides a
path of least resistance for electrical shock.
WARNING:
This machine is for indoor use only. Do not expose to rain or use in damp locations.
GUIDELINES FOR EXTENSION CORDS
USE PROPER EXTENSION CORD.
Make sure your extension cord is in good condition. When using an extension cord,
be sure to use one heavy enough to carry the current your product will draw. An undersized cord will cause a drop in line
voltage, resulting in loss of power and cause overheating.
Be sure your extension cord is properly wired
and in good condition. Always replace a damaged extension cord or have it
repaired by a qualified person before using it. Protect your extension cords from sharp objects, excessive heat and damp or
wet areas.
ACCESSORIES AND ATTACHMENTS
RECOMMENDED ACCESSORIES
WARNING:
To avoid injury:
• Use only accessories recommended for this band saw.
• Follow instructions that accompany accessories. Use of improper accessories may cause hazards.
• Use only accessories designed for this band saw to avoid injury from thrown broken parts or work pieces.
• Do not use any accessory unless you have completely read the instruction or operator’s manual for that
accessory.
CARTON CONTENTS
UNPACKING AND CHECKING CONTENTS
Carefully unpack the band saw and all its parts, and compare against the illustration following.
WARNING:
• To avoid injury from unexpected starting, do not plug the power cord into a power source receptacle during unpacking and
assembly. This cord must remain unplugged whenever you are assembling or adjusting the band saw.
• If any part is missing or damaged, do not plug the band saw in until the missing or damaged part is replaced, and assembly
is complete.