15
5. Connecting to dust collector
The band saw provides a dust port. It should be connected with dust collector when sawing wood.
For the model with dust drawer
If you do not have dedicated band saw extraction, there is another chance to get rid of the saw dust. Most of debris except
usual dust drifts would fall through a grating into the dust drawer. It can be easily pulled out and cleaned.
MAINTENANCE
Warning! Always be sure the tool is switched off and disconnected the plug from the power supply before
inspection and maintenance
FREQUENT INSPECTION
The band saw should be inspected frequently.
The cord, in-lead, plug and switch should be inspected whether be in good condition.
Whether there is any damage on the drive part.
Cleaning
Clean out sawdust and chips from time to time. Carefully clean the blade guard and moving parts inside the band saw.
LUBRICATION
To keep the band saw in tip-top running condition, and to assure maximum service life, oil or grease the moving parts sand
rotating parts from time to time.
To reduce the emitted noise, always be sure that the blade is sharp and clean.
KEEP IN STORAGE
The band saw should be kept at dry clean and non-corrosive environment.
Dust port
Dust drawer