28
Service Search
NOTE
Both the
LNB 1 IN
and
LNB 2 IN
sockets should be connected
to your antennas either directly or via the loop-through cable.
If you have connected only one socket, some features such as
dual recording will not function.
The digital receiver has a database about broadcasting satellites
and their transponders, containing the following information:
satellite position, frequency range, symbol rate, polarization
and LNB frequency corresponding to the frequency range. So
you might not have to specify the
LNB Frequency
option. How-
ever, if you have selected the
Other
entry at the
Satellite Name
option to specify a satellite that is not in the satellite list, you
might have to fill in the correct LNB frequency. The absolute
difference between a broadcasting frequency and its LNB fre-
quency must be within 950 to 2150 MHz. For example, if the
frequency band of your desired satellite ranges from 3660 to
4118 MHz, you have to set the
LNB Frequency
option to
5150
MHz
.
The LNB has to be supplied with electric power to operate. Set
the
LNB Power
option to
On
if it does not have any other power
supply.
You had better ignore the
22 kHz
option.
The digital receiver is designed to be compatible with DiSEqC
(Digital Satellite Equipment Control) switches. It is possible
to connect several antennas to one digital receiver by DiSEqC
switches. A DiSEqC 1.0 switch allows switching between up to
four satellite sources and a DiSEqc 1.1 switch allows switching
between up to 16 satellite sources.
Set the
DiSEqC 1.0
option and the
DiSEqC 1.1
option accord-
ing to your antenna configuration.
Summary of Contents for TF 4000 PVR Plus
Page 1: ...TOPFIELD TF 4000 PVR Plus User Guide Digital Satellite Receiver Personal Video Recorder...
Page 2: ......
Page 99: ......