Topfield TF 4000 PVR Plus User Manual Download

Page: 93 / 100

8.3 From another digital receiver via RS-232 port

8.3

From another digital receiver via RS-232 port

It is possible to transfer the firmware from the digital receiver
to another same digital receiver by connecting them with a RS-
232 cable. To update the firmware with this method, perform
the following steps:

1. Turn off the target digital receiver.

2. Plug one end of a RS-232 cable (9 pin D-

sub cable) into the

RS-232

port on the dig-

ital receiver, and the other end into the
matching port on the other digital receiver.

3. Turn on the source digital receiver if not

already on.

4. Select the

Installation

Transfer Firmware

Transfer Firmware to Other IRD

menu,

then you get asked for confirmation; select

Yes

5. Turn on the target digital receiver to start

the firmware transfer.

6. A progress bar appears showing the

progress of the firmware transfer.

7. Restart the target digital receiver when the

firmware transfer is complete.

Summary of Contents for TF 4000 PVR Plus





































































































Search results

Summary of Contents for TF 4000 PVR Plus

Reviews:

Related manuals for TF 4000 PVR Plus

Brands by name

Popular brands

Topfield TF 4000 PVR Plus, User Manual

Search results

Summary of Contents for TF 4000 PVR Plus

Reviews:

Related manuals for TF 4000 PVR Plus

Brands by name

Popular brands