VoxiPlus
Advanced
INSTALLATION MANUAL
© 2008 TOPEX S.A.
page
40
For IP communication option:
)
Define the IP parameters
IP address
- enter the IP address of the system. It can be a numeric IP address or a text
address (in that case a dns request will be made by software).
Note:
In the previous window - you can notice one IP address, one port number and one serial port number for
each processor card.
IP Port num
- enter the number of the port through which the communication with the system is
achieved. The default value is 9009. This value is established also into the gateway system and
should not be modified.
)
Define the serial parameters
Serial Port num
- enter the serial port used in case of serial communication with the gateway.
The default value is COM1. This value must be in range COM1-COM12.
For serial dial up connection (optional)
)
Define the DialUp parameters
In case of IP communication this setting allows if is checked, a dialup connection to be
established. The Dialup Connection must be created from Windows (from "Dial-Up Networking") and
the connection name must not contain character space inside the text.
Option "Use PPP address" is used to indicate the "gwconfig" software to connect to the dialup
server address after a successfully connection. If this option is not validated, then the "gwconfig"
software will try to connect to the address specified in the "IP address" field.
If this parameter is checked you may choose a dialup connection from "DialUp connection
name". You must enter a "DialUp Number" which overwrites the number used at the creation of the
Dialup Connection. Also by pressing "Edit" button you can override the "User" and "Password" used
in process of authentication.
You must note that if changes are made to "User" or "Password", those changes are made also
in the Windows registry.
The field "Connection Timeout" is the time in seconds wait from the moment of starting the
DialUp connection and the obtaining the connection state.
