VoxiPlus
Advanced
INSTALLATION MANUAL
© 2008 TOPEX S.A.
page
32
4.1 Configuration by serial connection
In order to change the IP address you must connect to the Topex gateway from a desktop or
notebook computer using the serial (RS-232) connection.
)
Verify that the special serial cable is properly connected
)
Set the serial port (COM) properties of your computer to match the parameters of the
VoxiPlus serial connection (Bits per second - 115200; Data bits – 8; Parity – None; Stop
bits - 1; Flow Control – None). See below an example for the Windows XP operating
system:
)
Set the serial port properties:
Select Start>Control Panel> System
From System select
Properties>Hardware> Device
Manager :
