VoxiPlus
Advanced
INSTALLATION MANUAL
© 2008 TOPEX S.A.
page
31
4 VoxiPlus Advanced CONFIGURATION
The VoxiPlus configuration can be accomplished after all the connections were achieved and the
power up was done. This operation can be performed either using the serial or the Ethernet
connection, for these connections the default parameters must be known.
The VoxiPlus equipment default parameters are:
a. For serial connection:
Bits per second - 115200;
Data bits – 8;
Parity – None;
Stop bits - 1;
Flow Control – None.
IP address on the LAN
side,
192.168.110.15
– must be changed with a private IP address or
a public IP address
Permissions for ordinary user:
user name
- gsmgw
password
: 5tgb4rf
user name
- tpxadm
password
:
Permissions for advanced user
: user name
- root
password
: 91qwerty19
b. For Ethernet connection:
IP address on the LAN
side,
192.168.110.15
– must be changed with a private IP address or
a public IP address
SSH port
- 2222
Permissions for ordinary user:
user name
- gsmgw
password
: 5tgb4rf
Or user name
- tpxadm
password
: u53rp455
”
Permissions for advanced user
: user name
- root
password
: 91qwerty19
To configure the Topex gateway, perform the following steps:
Achieve a direct connection (by serial interface or SSH) to the VoxiPlus equipment
Change the default IP address
Set up the local time of the equipment
Install the OAM application
Configure the equipment from the OAM application
When you move the gateway to another location or office, or if you send it back to Topex for
upgrade or repairs, you should remember to restore the default IP address!
