TOPEX MobiLink
IP
Preliminary Manual
Duration
- total duration of the call, in seconds, starting from the moment the called party answers.
SID
–Session ID, each session for every call has a unique ID
In the following PBX Status example, a call from “0727…” is getting in through the cellular interface
Mobile 1 and goes out as an SIP call through VoIP port 261. Note that in this case the IP destination
addresses for signalling and RTP are different! The SIP call goes to the extension 241 of the IP PBX.
Starting one a half minute later, another mobile call comes in via cellular interface Mobile 2 from the
mobile number “0724” and goes out as an SIP call, via VoIP port 262, to the extension 284.
Now both mobile interfaces and both SIP ports of the MobiLinkIP are busy.
Next the user sees a cellular call routed with DISA function instead of “Target” number, as was done
previously. A single incoming call gets in through interface Mobile 1, from the phone number
“07245…”. It is routed as an intermediate (internal) call with protocol “unknown” on port 262 and gets
out as an SIP call on port 261 to the extension that is dialled in DISA mode.
Notice that the identity of the caller, ANI, which is here the cellular number, is transmitted all along:
TOPEX S.A. +4 021.408.39.00
Page 52 of 80
