TOPEX MobiLink
IP
Preliminary Manual
Buttons
Use
New
to create a new row (route definition),
Edit
to edit an existing definition,
Exit
get out of the
table, and
Save
to save the changes.
Del
erases from the table an existing route.
Defining a route
Net
: Address of the remote network or host to which you want to assign a static route. Notice that it is
not an IP address, like the one for the Topex MobiLink device, but the address of a network, so that
the last two groups of figures will always be zero.
Netmask
: the subnet mask determines which portion of the destination IP address is the network part
and which is the host part.
Gateway
: the gateway to be used, enter here the IP address of the router which allows for contact
between MobiLinkIP and the remote host or network.
Enable:
Each of the routes defined or edited can be individually enabled or disabled.
This is especially useful when configuring several mobiLinkIP devices one after another, or when the
configuration and requirements of the local network change frequently.
In this case pre-define several routes, even if they are not currently in use, and leave enabled only the
ones strictly necessary for the current configuration.
The other routes are available, they may be edited and enabled as the need arises.
TOPEX S.A. +4 021.408.39.00
Page 38 of 80
