Topex multiSwitch User Manual Download Page 134

Page: 134 / 170

multiSwitch – user manual

Offline

" – the user is not in the network

Busy

" – the user is busy

No Answer

" – the user does not answer

Always

" – all the calls received by the user are forwarded. If you want to forward the

calls in all the situations above, select all the available options.

Number [Offline]

– the phone number to which the call is forwarded in case the user is in the

Call Forward State Offline

" status;

Number [No Answer]

– the phone number to which the call is forwarded in case the user is in

the "

Call Forward State No Answer

" status;

Number [Busy]

– the phone number to which the call is forwarded in case the user is in the

Call Forward State Busy

" status;

Number [Always and Selective]

– the phone number to which the call is forwarded in case

the user is in the "

Call Forward State Always

" forwarding status or in case the "

Selective

Forwarding

" option is selected.

Call Wait

– enables the call waiting service

Call Wait State

– the call wait status - checks if that option is also enabled in the phone

Voice Mail

– enables the voicemail service

Voice Mail Number

– the number of the voicemail to which the calls will be forwarded;

Voice Mail State

– this option contains several statuses that determine activation of the voicemail:

Offline

" – the user is not in the network, "

Busy

" – user is busy, "

No Answer

" – user does not answer,

Always

" – all the calls received are forwarded to the voicemail;

VoiceMail 2 Email state

– administrator setting for the voicemail 2 email service

VoiceMail 2 Email

– enabling the voicemail 2 email service

Missed Calls to Email

– enabling the missedcalls 2 email service, which sends missed calls

notifications to a specified e-mail address

Missed Calls to Email State

– administrator setting for the missed calls 2 email service

Missed Calls to Email Email

– the e-mail address where the missed calls notifications will be sent

Missed Calls to SMS

– enables the missedcalls 2 SMS service, which sends missed calls SMS

notifications to a specified phone number

Missed Calls to SMS State

– administrator setting for the missed calls 2 SMS service

Missed Calls to SMS Number

– phone number to which the missed calls notifications will be sent

Billing Profile

– the billing profile to which the SIP user will belong The profile is predefined in the

Billing – Profiles

menu.

8.12.3 The "FXS User Templates" option

The "FXS User Templates" option contains templates for analogue users to be added in the

database of the TOPEX multiSwitch equipment.

You can create a template for a FXS user, and when adding a client from the "User

Management - FXS" menu, you can use the "New User from Template" option, which will simplify your
work.

This option is recommended when massive data volumes must be entered in the system.

The fields that must be filled in are similar to the ones in the "FXS" menu.

Summary of Contents for multiSwitch











































































































































































Search results

Summary of Contents for multiSwitch

Reviews:

Related manuals for multiSwitch

Brands by name

Popular brands

Topex multiSwitch, User Manual

Search results

Summary of Contents for multiSwitch

Reviews:

Related manuals for multiSwitch

Brands by name

Popular brands