manualshive.com logo in svg

Topcon SP-1P, User Manual

Share
Download
Topcon SP-1P User Manual Download Page 10

8

HOW TO READ THIS MANUAL

• Read the instructions on pages 1 to 10 before using the machine.
• Regarding connection to various devices, see "CONNECTING EXTERNAL I/O TERMINALS" on

page 29.

• If you would like an overview of the system, begin by reading "BASIC OPERATIONS"(page 34).
• For setting various functions, see "SETTING FUNCTIONS ON SETUP SCREEN" on page 55.

GENERAL MAINTENANCE INFORMATION

USER MAINTENANCE

To maintain the safety and performance of the equipment, never attempt to repair or perform maintenance.
These tasks should be performed by an authorized service representative.
Maintenance tasks that can be performed by the user are as follows; for details, follow the manual’s instruc-
tions.

CLEANING OF PHOTOGRAPHING WINDOW

For details, See "CLEANING THE PHOTOGRAPHING WINDOW GLASS" on page 82.

DISCLAIMERS

• TOPCON is not responsible for damage due to fire, earthquakes, actions or inactions of third persons or other

accidents, or damage due to negligence and misuse by the user and any use under unusual conditions.

• TOPCON is not responsible for damage derived from inability to properly use this equipment, such as loss of

business profits and suspension of business.

• TOPCON is not responsible for damage caused by operations other than those described in this User Manual.
• The device does not provide a diagnosis of any condition or lack thereof or any recommendations for appropri-

ate treatment. The relevant healthcare provider is fully responsible for all diagnosis and treatment decisions
and recommendations.

Summary of Contents for SP-1P





























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands