Topcon SP-1P User Manual Download

Page: 84 / 92

MAINTENANCE

CLEANING THE INSTRUMENT

• Dust on photographing window glass.....Blow off dust with a blower.
• Fingerprints and oil spots on photographing window glass

Blow off dust with a blower and wipe the surface gently with a
camera lens cleaner using clean gauze.

• Dirty instrument cover...................... Wipe the surface with the attached silicon cloth or a dry soft

cloth. Never use solvents or a chemical duster.

CLEANING THE PHOTOGRAPHING WINDOW GLASS

• To secure auto alignment and correct photographing values, clean the photographing window

glass after each day's work.

• Clean the glass when "CLEAN THE PHOTOGRAPHING WINDOW GLASS" is displayed on the

control panel screen.

Prepare a lens cleaner.

Using a blower, blow off any dust from the surface of the lens or glass.

Moisten an applicator with the lens cleaner.

Lightly wipe the lens from its center point toward the outside in a swirl, using the applicator.

CAUTION

To avoid electric shocks, make sure the power is off and the power
cable is unplugged before maintenance.

NOTE

• To avoid damage to the instrument or electric shock, turn the power switch

OFF and unplug the power cord before maintenance.

• Avoid spraying a cleaner directly onto the instrument. In such a case,

detergent or any other fluid may permeate through the vent hole, etc.
which can cause mechanical problems with the instrument.

• When not in use, turn off the power switch.
• Do not clean plastic parts with solvents. Benzine, thinner, ether and gaso-

line may cause discoloring and decomposition.

How to move the applicator

How to wipe the lens or glass

Summary of Contents for SP-1P





























































































Search results

Summary of Contents for SP-1P

Reviews:

Related manuals for SP-1P

Brands by name

Popular brands

Topcon SP-1P, User Manual

Search results

Summary of Contents for SP-1P

Reviews:

Related manuals for SP-1P

Brands by name

Popular brands