Topcon SP-1P User Manual Download | Manualshive

Page: 71 / 92

background image

69

GENERAL INFORMATION ON USAGE AND MAINTENANCE

ENVIRONMENTAL CONDITIONS FOR PACKAGING IN TRANSPORTATION

(Product in its normal transport and storage container as provided by manufacturer)
Temperature

: -40°C to 70°C

Humidity

: 10% to 95%

ELECTRIC RATING

Source voltage: 100-240V AC, 50-60Hz
Power input: 70-120VA

SAFETY DESIGNATIONS PER IEC 60601-1 STANDARD

• Type of protection against electric shocks: Class

I

The Class

I

equipment provides means to connect itself to the protective grounding system of utilities

to thereby independently provide protection against electric shocks by keeping connectable metal
components nonconductive in case of a failure in the basic insulation.

• Degree of protection against electric shocks: B type applied component

The B type applied component provides the specified degree of protection against electric shocks with
regard to the reliability particularly of leak current, patient measuring current and protective utility con-
nection (in case of Class

I

equipment).

• Degree of protection against harmful intrusion of water (IEC 60529): IPX0

This product does not provide protection against intrusion of water.
(The degree of protection against harmful ingress of water defined in IEC 60529 is IPX0)

• Classification by sterilization/disinfection method specified by manufacturer

This product does not have a component requiring sterilization/disinfection.

• Classification by safety of use in air/flammable anesthetic gas, oxygen or nitrous oxide/flammable anes-

thetic gas atmosphere

• Equipment not suited for use in air/flammable anesthetic gas, oxygen or nitrous oxide/flammable

anesthetic gas atmosphere

• This product should be used in an environment free of flammable anesthetic gas and other flamma-

ble gases.

• Classification by operation mode

Continuous operation refers to an operation under normal load conditions, within the specified temper-
ature and without limitations on the operating time.

DIMENSIONS AND WEIGHT

Dimensions: 286~468mm(W) × 445~592mm(D) × 486~681mm(H)
Weight

: 17.0kg

«
...
69
70
71
72
73
...
»

Summary of Contents for SP-1P





























































































Reviews:

No comments

Related manuals for SP-1P

Brand: Olympus Pages: 15

Brand: Olympus Pages: 6

Brand: BioTools Pages: 29

Brand: Bresser Pages: 16

Brand: Bresser Pages: 32

Brand: Bresser Pages: 28

Brand: Bresser Pages: 28

Brand: Bresser Pages: 102

Brand: BEL Pages: 13

Brand: 3D Global Pages: 4

Brand: 3D Global Pages: 29

Brand: Olympus Pages: 36

Brand: OPTO-EDU Pages: 3

115 V, 50/60 Hz

Brand: 3B SCIENTIFIC PHYSICS Pages: 2

Brand: 3B SCIENTIFIC PHYSICS Pages: 24

Brand: Labomed Pages: 36

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands