51
12.ANGLE MEASUREMENT
This section explains the procedures for basic angle measurement in Observation mode.
• It is possible to allocate softkeys in measurement menus to suit various applications and the ways
that different operators handle the instrument.
C
"20.6 Allocating Key Functions"
Use the “0SET” function to measure the included angle between two points. The horizontal angle can
be set to 0 at any direction.
PROCEDURE
1. Sight the first target as at right.
C
"11. FOCUSSING AND TARGET SIGHTING"
2. In the first page of Observation mode, press
[0SET]
.
[0SET]
will flash, so press
[0SET]
again.
The horizontal angle at the first target becomes 0°.
3. Sight the second target.
The displayed horizontal angle (HA-R) is the
included angle between two points.
12.1
Measuring the Horizontal Angle between Two Points
(Horizontal Angle 0°)
