manualshive.com logo in svg

Topcon Sokkia FX Series, Operator'S Manual

Share
Download
Topcon Sokkia FX Series Operator'S Manual Download Page 54

10. CONNECTING TO EXTERNAL DEVICES

46

FX has two different USB ports. TOPCON CORPORATION cannot guarantee that all USB devices 
are compatible with the FX USB ports.

G

• TOPCON CORPORATION cannot guarantee that all USB devices are compatible with the FX USB 

ports.

• Use a computer WindowsXP/Vista/7 is based and USB connection is capable.

Each port is used for connection to different types of devices.

Using USB port 2, the instrument and a computer can be communicated. There are USB mode and 
Mobile mode.

G

• Remove the USB cable from USB port 2 carefully to avoid damaging the cable.

Connecting the FX to a computer to transfer data from FX

$

• As for the download and install of "exFat file system driver"/ActiveSync/Windows Mobile Device 

Center, please access to Microsoft support site.

I

USB mode connection

When connecting Windows XP, "exFat file system driver" needs to be installed to the computer.

10.3

Connecting to USB devices

Port name

Device type

USB port 1

USB memory devices etc.

USB port 2

computers etc.

USB port 1

USB port 2

Summary of Contents for Sokkia FX Series







































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands