18
8. PREPARE THE VEHICLE
• Arrange the wheel encoder cable so that it stays within the vehicle width.
• The quantity of wheel encoder parts is different from vehicle to vehicle. Contact your local dealer for
more information.
After mounting the IP-S3 cube on the roof of the vehicle, connect it to the timing box using the included
cables. Keep the rear window slightly open to route the cables to the timing box. Use a gasket to
decrease the gap in the open window.
1. Trim the gasket to fit the rear window.
2. Slightly lower the window, and attach the gasket.
8.4
Install the Gasket
Gasket
Window glass of rear seat
