27
9. INSTALLING THE IP-S3 CUBE
Connect the Indicator Box Cable
1. Remove the cap from the indicator box port.
2. Using the indicator box cable, connect the timing box to the indicator box as shown below.
Connect the Wheel Encoder Cable to the Box
1. Remove the cap from the timing box Encoder port.
2. Connect the wheel encoder cable to the Encoder port on the timing box. The encoder port is
located next to the wheel encoder port. See "8.3 Install the Wheel Encoder" on page 16 for more
information.
Indicator box cable
[Timing Box Side] is written
on the tag of this part.
[Indicator Side] is
written on the tag of
this part.
Wheel encoder cable
[Timing Box Side] is written on
the tag of this part.
Encoder port (white)
