17
8. PREPARE THE VEHICLE
3. Make a hole on the overfender of the rear tire to fix the wheel encoder bar.
4. Pass the wheel encoder bar through the hole on the overfender of the rear tire.
5. Align the hole of wheel encoder with the nut of the rear tire.
6. Attach the wheel encoder bolt.
Installing the wheel encoder cable
1. Connect the cable of rear tire to the wheel encoder. (The connection for the IP-S3 cube will be
mentioned later.)
Wheel encoder bar
Hole
Overfender
Wheel encoder
Special bolt
Wheel encoder
Wheel encoder cable
[Sensor Side] is written on the tag
of this part.
