19
9. INSTALLING THE IP-S3 CUBE
To prevent theft, only install the IP-S3 cube to the mount kit when surveying.
The IP-S3 cube has already been calibrated. Do not disassemble it.
1. Loosen the 4 clamp levers of the slide bar.
2. Extend the slide bar in the direction shown in the diagram below.
3. Tighten the 4 clamp levers.
9.1
Install the IP-S3 Cube
Warning
Carefully attach the IP-S3 cube to the mount kit. Damage to the instrument or serious
injury can occur.
Before approaching the extended slide bar, look around carefully. The slide bar may hit
your head or face to cause injury.
Clamp lever
Slide bar
Extend.
