Topcon HiPER GD, Operator'S Manual

Page: 79 / 180

Radio Configuration
1-866-4TOPCON www.topconpositioning.com
2-37
Unlike the UHF radio modems and PDLCONF, TopSURV
automatically connects the receiver and modem boards for
configuration purposes. When you configure radios, you
configure the Base and Rover radios separately.
1. Using the RS232 cable, connect your external controller
(FC-1000) to the receiver’s serial port A.
2. Press the power buttons on the receiver and external
controller to turn them on, and start TopSURV.
3. Click Job->Config->Survey to open the Select Survey
Config dialog box (Figure 2-36).
Figure 2-36. Select a Survey Configuration
4. From the GPS+ Config drop-down list, select My RTK, or
the name of your GPS+ survey configuration, and click the
browse (“...”) button (Figure 2-36).
TIP
If this is a new configuration, refer to the
TopSURV User’s Manual for the procedure to
configure a new survey. Otherwise, continue
below to configure your radio.
5. Press Next to navigate to the Base or Rover Radio
configuration screen, usually a couple dialog boxes beyond
the Select Survey Config dialog box.