Topcon GPT-8000 Series Instruction Manual Download Page 118

Page: 118 / 145

9 CHECK AND ADJUSTMENT

9-15

9.8 Inspection and Adjustment of Optic Axis for
Auto -Tracking (GPT-8000A Series)

Activates auto tracking to the prism.
Confirm if the center of telescope reticle and the center of the prism is coincided.
Any error between them requires adjustment according to the following procedure.

Prism center

Telescope reticle center

Centers of prism
and telescope is shifted

Normal position

Prism center

Telescope reticle center

• Position a prism around 0 in horizontal and about 50m to 100m (164 to 328ft) apart from the

GPT-8000A series.

• Take care not to be interrupted the optical path during measurement.

Operating procedure

Operation

Display

Level the instrument properly with the plate
level and press the [F5] key from main menu.

[F5]

Press the [F6] key to get the next page.

[F6]

Press the [F1] key to select the adjustment of
tracking axis.

[F1]

Operate H / V jog shuttle to collimate the
prism

Collimate

Press the [F6](MEAS) key.
The measurement starts.

[F6]

After the measurement, press the [F1](TURN)
key.
The instrument and telescope will turn
automatically.

[F1]

Operate H / V jog shuttle to collimate the
prism

Collimate

Adjustment

F1 V0/Axis (Measurement)

F2 V0/Axis (Constant list)

F3 Date Time

F4 Instrument constant

↓

Adjustment

F1 Adj Tracking Axis

↑

Adj Tracking Axis

[1/2]

>Sight the prism !!

TURN MEAS

Adj Tracking Axis

Wait

Adj Tracking Axis

[2/2]

>Sight the prism !!

TURN MEAS

Summary of Contents for GPT-8000 Series


















































































































































Search results

Summary of Contents for GPT-8000 Series

Reviews:

Related manuals for GPT-8000 Series

Brands by name

Popular brands

Topcon GPT-8000 Series, Instruction Manual

Search results

Summary of Contents for GPT-8000 Series

Reviews:

Related manuals for GPT-8000 Series

Brands by name

Popular brands