manualshive.com logo in svg

Topcon GPT-8000 Series, Instruction Manual

Share
Download
Topcon GPT-8000 Series Instruction Manual Download Page 25

1 NOMENCLATURE AND FUNCTIONS

1-14

1.9 Using together with RC-2II Remote Control System
(GPT-8000A series)

Using together with RC-2II Remote Control System makes it possible to optical communicate
between the instrument and remote controller RC-2II, the prism side. This gives easy operation by
one man surveying in applying programs.
Also connecting data collector to remote controller, you can manage communication reciprocally
between the instrument and direct to data collector.

Turn-round function

You can turn the GPT-8000A series round to the remote controller RC-2II side easily by [Turn-round]
key of the remote controller RC-2II. This function helps to increase one man surveying efficiency.

See to Section 5.7 “External Link (GPT-8000A series)” and Chapter 8 “PARAMETERS SETTING
MODE” for further information.

• Set the transmit path to " RC".
• Set the transmit channel same as RC-2II side.
• To execute transmission, set the remote in Programs mode to [Remote].

Summary of Contents for GPT-8000 Series


















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands