60
Encoder output
Pulse frequency divi
-
sion
Child
•
The encoder outputs an electronic gear for dividing the encoder
aaaasdfpulse. Change the pulse resolution sent to the host computer.
•
It can only be divided, not multiplier. The parameter 60 ≤ parameter
61 must be set.
•
If set to parameter 60=1 and parameter 61=1, the crossover function
will be Cancel, the AB signal is straight through.
•
The frequency division can change the number of encoder lines out
-
put (only smaller than the motor encoder)
The number of lines) is convenient for connection with the host de
-
vice. Especially in the upper device receiving
When the maximum frequency of the pulse is limited, the encoder
pulse can be reduced after the frequency division setting frequency.
•
If the motor encoder uses a C-line encoder, the output encoder line
number for
For example, if you use a 2500 line encoder, the number of output encoder
lines is
•
The number of output encoder lines can be a fraction.
1
～
31
61
Encoder output
Pulse frequency divi
-
sion
mother
Refer to the description of parameter 60.
1
～
31
Summary of Contents for SD300
Page 87: ......
Page 89: ...Chapter 7 Running 7 9 2 Operation l Set the parameter values ...
