9
ELECTRIC DUAL ACTION (DA) SANDER
EN
Translation of the original instructions
CAUTION
reduce the risk associated with environmental contamination:
• Do not throw electric power tools into the household waste! In accordance with the European Directive 2002/96/
CE on Waste Electrical and Electronic Equipment and transposition into national law, used electric power tools
must be collected separately and recycled in an environmentally friendly manner.
• Separate collection of used products and packaging allows materials to be recycled. Use of recycled materials
helps prevent environmental pollution and reduces the demand for raw materials.
• Dispose of all the process dust in accordance with all applicable regulations.
To reduce the risks associated with fly off of abrasive product or parts:
•
Use care in attaching abrasive product and disc pad; following the instructions to ensure that they are securely
attached to the tool before use.
• Never free spin the tool or otherwise allow it to be started unintentionally.
• Never point this product in the direction of yourself or another person, or start tool unintentionally.
• Never over-tighten accessory fasteners.
Specification:
Model No.
Sander
Type
Orbit
Pad Size
Free
Speed
Motor Hp
Versions of
Volatge AC-in
Length
Weight
inch mm inch mm (r.p.m.)
(W)
inch mm lbs kgs
ELSN-B50H(V)-2.5
Non
Vacuum
3/32 2.5
5
127
4,000
7,000
9,000
10,000
350W Max
150W Rated
110VAC x 60Hz
220VAC x 50Hz
10.9 278 2.4 1.08
ELSN-B50H(V)
3/16
5
5
127
10.9 278 2.4 1.08
ELSN-B60H(V)-2.5
3/32 2.5
6
152
11.9 303 2.6 1.21
ELSN-B60H(V)
3/16
5
6
152
11.9 303 2.6 1.21
ELSN-B50H(V)-2.5-4
Non
Vacuum
3/32 2.5
5
127
10.9 278 2.4 1.08
ELSN-B50H(V)-4
3/16
5
5
127
10.9 278 2.4 1.08
ELSN-B60H(V)-2.5-4
3/32 2.5
6
152
11.9 303 2.6 1.21
ELSN-B60H(V)-4
3/16
5
6
152
11.9 303 2.6 1.21
ELSC-B50H(V)(HM)-2.5
Central
Vacuum
3/32 2.5
5
127
10.9 278 2.4 1.08
ELSC-B50H(V)(HM)
3/16
5
5
127
10.9 278 2.4 1.08
ELSC-B60H(V)(HM)-2.5
3/32 2.5
6
152
11.9 303 2.6 1.21
ELSC-B60H(V)(HM)
3/16
5
6
152
11.9 303 2.6 1.21
ELSC-B50H(V)(HM)-2.5-4
Central
Vacuum
3/32 2.5
5
127
10.9 278 2.4 1.08
ELSC-B50H(V)(HM)-4
3/16
5
5
127
10.9 278 2.4 1.08
ELSC-B60H(V)(HM)-2.5-4
3/32 2.5
6
152
11.9 303 2.6 1.21
ELSC-B60H(V)(HM)-4
3/16
5
6
152
11.9 303 2.6 1.21
OPERATING INSTRUCTIONS
Prior to the operation
The tool is intended to be operated as a hand held tool. It is always recommended that while using the tool, operators
stand on a solid floor, in a secure position with a firm grip and footing. Be aware that the sander can develop a torque
reaction.
Starting and stopping sander
1. Plug-in the sander’s AC power cord to the power source (220VAC output). The warning “ beep ” sounds would be
occurred after the plug is securely plug-in to the power source and the LED indicator shows “ Solid Red ” color at
the moment.- see figure 1.
2. Press the power on/off button “ ϴ ” on the button plate to switch on the sander. The LED indicator shows “ flash
green ” color after sander being switched on. - see figure 2.
3. Adjust the speed by pressing “ + ” or “ – “ buttons on the button plate. Press “ + “ is to raise up to higher speed
setting, “ – “ is to lower the speed setting. - see figure 3.
4. Press the lever to start running the tool. Release the Lever to stop the tool.
