8
ELECTRIC DUAL ACTION (DA) SANDER
EN
Translation of the original instructions
4. Power Tool Use and Care
a. Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job
better and safer at the rate for which it was designed.
b. Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with
the switch is dangerous and must be repaired.
c. Disconnect the plug from the power source and/or the battery pack form the power tool before making any adjust-
ments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting
the power tool accidentally.
d. Store idle power tools out of reach of children and do not allow persons unfamiliar with the power tool or these
instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.
e. Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condi-
tion that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many acci-
dents are caused by poorly maintained power tools.
f. Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind
and are easier to control.
g. Use the power tool, accessories and tool bits, etc. in accordance with these instructions, taking into account the
working conditions and the work to be performed. Use of the power tool for operations different from those in-
tended could result in a hazardous situation.
5. Service
Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that
the safety of the power tool is maintained.
WARNING
Reduce the risks associated with impact from abrasive product, disc pad, or tool breakup,
sharp edges, hazardous downforce, rupture, vibration and noise :
• Only personnel who are properly trained should be allowed to service this tool.
• If you notice any abnormal noise or vibration when operating the tool, immediately discontinue its use and inspect
for worn or damaged components. Correct or replace the suspect component. If abnormal noise or vibration still
exists, return the tool to SUMAKE for repair or replacement. Refer to warranty instructions.
• Prior to use, inspect abrasive product and accessories for possible damage. If damaged, replace with new abra-
sive product and accessories available from SUMAKE.
• Only use accessories supplied or recommended by SUMAKE.
To reduce the risks associated with vibration
• If any physical hand/wrist discomfort is experienced, work should be stopped promptly to seek medical attention.
Hand, wrist and arm injury may result from repetitive work, motion and overexposure to vibration.
To reduce the risks associated with loud noise :
• Always wear hearing protection while operating this tool. Follow your employer’s safety policy or local/national
standards for personal protective equipment requirements.
To reduce the risks associated with fire or explosion :
•
Do not operate the tool in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
The abrasives are able to create sparks when working material, resulting in the ignition of the fl ammable dust or
fumes.
•
Refer to MSDS of material being worked as to potential for creating fi re or explosion hazard.
To reduce the risks associated with ingestion of harmful / toxic dusts from sanding surfaces such as
lead painted surfaces, woods and metals :
• Contact with or inhalation of these dusts can endanger the health of operator and bystanders. Use appropriate
personal protective equipment.
• Use appropriate respiratory and skin protection, or local exhaust as stated in the MSDS of the material being wor-
ked on.
