11
ELECTRIC DUAL ACTION (DA) SANDER
EN
Translation of the original instructions
ATTACHING DISC PADS
1. Secure the Spindle with the flat wrench provided with the tool, and screw the Disc pad on. Tighten to firm hand-
tightness. Do not over tighten.
2. To remove the Disc Pad, insert the flat wrench between the Disc Pad and shroud. Secure the Spindle with the flat
wrench and unscrew the Disc pad. - see figure 5.
Figure 5
CLEANING
1. Periodically blow out all air passages and area above Disk Pad and under shroud with dry compressed air. All plastic
parts should be cleaned with a soft damp cloth. NEVER use solvents to clean plastic parts.
2. Wear safety glasses while using compressed air.
HEALTH AND SAFETY INFORMATION
RoHS Compliant
This product and the associated component parts are “RoHS Compliant” and do not contain any of the sub
stances in excess of the maximum concentration values in EU Directive 2011/65/EU, as amended by Commis-
sion Decision 2005/618/EC and other amendments issued as of the date code marked on the product.
Waste Electrical & Electronic Equipment (WEEE) Compliant
• Do not dispose of electrical appliances as unsorted municipal waste, use separate collection facilities.
• Contact your local government for information regarding the collection systems available.
•
If electrical appliances are disposed of in landfills or dumps, hazardous substances can leak into the groundwater
and get into the food chain, damaging your health and well-being.
• When replacing old appliances with new ones, the retailer is legally obligated to take back your old appliance for
disposal at least for free of charge
Federal Communications Commission (FCC) Compliance Statement
IMPORTANT NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC rules. These limits are designed to provide a reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause har-
mful interference in which case the user will be required to correct the interference at his own expense.
NOTICE: Changes or modifications not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
