TOOLSPACE XW-1201, Manual

Page: 16 / 20

4. Make sure the latches on battery pack snap in place and battery pack is secured in drill
before beginning operation.
5. To remove the battery pack, withdraw it from the tool while pressing the buttons
3 )
on both sides of the battery.
When the switch is pressed, the battery indicator on the handle shows the battery charge status.
If only the red segment is lit, the battery has less than 30% capacity and the battery needs to
be charged.
RECHARGING THE LI-ION BATTERY PACK
Note:
The supplied battery is only partially charged. Before initial use, fully charge battery.
After the charge, we recommend fully discharging the battery and the full charge/
discharge process to be repeated once or twice to “format” the battery pack. Perform this
charge as soon as possible after the battery has been discharged and cooled.
To ensure long life of the battery, it must be maintained carefully.
• The battery must be recharged:
- befor rchase;
- often, during use/season, usually after using the machine
- before leaving the machine disused for a long period;
- during long-term storage
- before starting up the machine after a long period of disuse.
• The discharged battery must be recharged as soon as possible. Let a hot battery cartridge
cool down before charging it.
• Recharge the accumulators in time, before they are discharged fully, otherwise
the accumulators can be damaged permanently (irreversibly). It is ideal to recharge
the battery after each consumption.
• The lithium-ion battery can be charged in any state of charge, and the charging process can
be interrupted at any time without harming the battery (no memory effect).
• An unused battery loses capacity faster than a battery which is being used.
Only use the charger supplied with the product!
• Charge the battery pack in a dry place with room temperature at 5°C - 40°C.
• It is possible that the battery and/or charger can become moderately warmer during
charging, this is normal and doesn‘t indicate a fault.
• Never cover the charger.
• reduced machine operating times and accelerated battery charging times
indicate that the battery has a reduced capacity and should be replaced.
• Once every 12 months, preferably at the start of the new season, replace the battery with
a new, identical type. (If the battery has already been in use at least once)
CAUTION!
Never charge the battery in an explosive or environment and near
liquids. Don‘t carry out charging on a slightly substrate (such
as paper, textiles, etc.) when the battery is removed.