TOOLSPACE XW-1201, Manual

Page: 14 / 20

f. Check that the power supply voltage is with conformity required by the charger
manufacturer. The electric circuit must be properly fused. Connect the charger only
on the plug with a protective device to prevent stray current with a rated fault current of
not more than 30 mA.
PERSONAL PROTECTION AND FIRST AID
• If possible, work only in areas where could be, in case of need, called an ambulance!
Note: Note - we recommend always having:
• A re extinguisher (snow, powder, halotron) at your disposal.
• A r.
• Mobile phone or other device for quickly calling emergency services.
•
Accompaniment must keep a safe distance from the workplace while always seeing you!
•
• If persons with circulatory problems are often exposed to excessive vibration, they may
experience injury to blood vessels or their nervous system. The vibrations may cause
the following symptoms appear on ngers, hands or wrists: numbness, itching, pain, tingling,
changes in skin colour or of the skin itself. If any of these symptoms occur, consult a doctor.
• When an electric shock is caused, it is necessary more than anywhere else to put emphasis
on safety and risk elimination for the rescuers. The affected person usually stays in contact
with electrical equipment (source of injury) because of muscle spasms caused by the electric
shock. Traumatic process continues in this case. It is therefore necessary to TURN THE
POWER OFF FIRST using any possible way. Subsequently CALL AN AMBULANCE or other
professional service, and then PROVIDE FIRST AID! Ensure free airways, check breathing,
check pulse, put the affected
on their back, bend their head and stick out their lower
jaw. If necessary respiration into the lungs and heart massage.
IN CASE OF FIRE:
• T r re extinguisher (snow, powder, halotron).
• DO NOT PANIC. Panic can cause even more damage.
RESIDUAL RISKS
Even if the device is used according to instructions, it´s impossible to eliminate all
the risks associated with its operation. The following risks may occur arising from
device construction:
• Electrical hazard caused by touch with live parts (direct contact) or with parts, which came
under a voltage due to failure of the device (indirect contact).
• Heat hazard resulting in burning or scalding and other injuries caused by possible contact
with high temperature objects or materials including heat sources.
• Dangers caused by contact with harmful liquids, gas, mist, smoke and dust or by their
inhalation (for example breathing in).
• Dangers caused by failing in ergonomic principles by construction of the machine, for example
dangers caused by unhealthy position of body or excessive overcharge and unnature to the anatomy
of the human hand-arm, relate to construction of handle, equilibrium of the machine.
• Dangers caused by unexpected starting, unexpected exceeding of motor revs caused by
defect/failure of control system, relate to the defects by the handle and placing of drivers.