TOOLSPACE XW-1201, Manual

Page: 12 / 20

SERVICING
a. Repairs to the power tools should be carried out by a person using
identical replacement parts.
In this way, the same level of safety of the power tool as
before repair will be ensured.
b. Damaged battery packs must never be repaired. Battery packs should only be repaired
by the manufacturer or an authorised service centre.
SAFETY INSTRUCTIONS FOR DRILLS
1) SAFETY INSTRUCTIONS FOR ALL WORK ACTIVITIES
a. Hearing protection must be worn when hammer drilling. Exposure to noise can cause
hearing loss.
- applies only to hammer drills and is deleted in the case of drills
.
b. An additional handle(s) should be used. Loss of control can cause personal injury.
-
This warning only applies to tools that are supplied with an additional handle(s).
c. Before using the tool, it is necessary to properly support against the tool.
This
tool produces a high output torque and without proper support against the tool during
operation, loss of control can happen, resulting in personal injury. - applies only to tools with
a maximum output torque greater than 100 Nm.
d. When performing an activity where a machining tool (or fasteners in the case
of a drill used as a screwdriver) can touch a concealed guide or its own lead,
the electromechanical tool must be held by insulated gripping surfaces.
Touch with
the machining tool or joining tool with “live” lead may cause that uninsulated metal parts
of the electromechanical tool become "alive" and may result in electric shock to the user.
2) SAFETY INSTRUCTIONS WHEN USING LONG DRILL BITS
a. Never use the machine at a speed higher than the maximum nominal drill speed. At
higher speeds, it is likely that the drill bit will bend if allowed to rotate freely without being
in contact with the workpiece, which may result in personal injury.
b. At the beginning of the drilling operation, always have a low speed and the tip of
the drill bit must touch the workpiece.
At higher speeds, it is likely that the drill bit will
bend if allowed to rotate freely without being in contact with the workpiece, which may
result in personal injury.
c. It must only be pushed in a straight line with the drill bit and must not be subjected
to excessive pressure.
Drill bits may bend and crack or cause loss of control, resulting in
personal injury.
IMPORTANT SAFETY INSTRUCTIONS FOR THE BATTERY
a. Battery-packs and batteries mustn’t be disassembled, opened or cut.
b. Don‘t expose battery-packs or batteries to heat or re. Storing in direct sunlight and
effects of direct sunlight should be avoided.
Temperature higher than the critical limit can
result in overheating of lithium batteries, their explosion and subsequent re-up. This warning
applies generally to ALL devices in which lithium batteries are used.
c. Don‘t short-circuit the battery-packs or batteries. Batteries shouldn‘t be accidentally
stored in boxes or drawers as this would allow them to short-circuit with each other or
by metal objects.
d. Battery-packs or batteries mustn‘t be removed from their original packaging before you
intend using them.
e. Battery-packs or batteries mustn‘t be exposed to mechanical impact.