This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method (e.g. photocopying, microfilming, or the capture in
electronic data processing systems) requires prior written approval from the editor. Reprinting, also in part, is prohibited.
This publication represent the technical status at the time of printing.
Copyright 2018 by Conrad Electronic SE.
*1577228_v1_0118_02_IPL_m_en
Charging a battery
Fully charge the rechargeable battery before first use.
Before charging the internal battery, ensure that the USB power source can deliver
a sufficient charging current, otherwise you may damage the product.
Do not use a USB port on a computer, keyboard or USB hub without its own power
supply to charge the battery, as the current supplied by these ports is not sufficient.
•
Connect the charging port via the enclosed cable to a suitable USB power source (e.g. USB
power supply unit with 1000 mA output current).
• During the charging process, the charging indicator lights up red.
• As soon as the rechargeable battery is completely charged, the charging indicator turns
green.
• Disconnect the cable from the product and the power source as soon as the rechargeable
battery is fully charged. The product is now ready for use.
The charging time is approx. 2.5 hours, depending on the charge status of the
battery.
Power on/off
• Press the on/off button to switch the product on. The LEDs light up with full power.
• Press the on/off button again to dim the LEDs.
• Press the on/off button again to switch off the product.
Positioning
•
You can fix the product with the belt clip, for example, to your belt or a trouser pocket.
• Fold out the hook to hang the product. Thanks to the ball joint, the hook can be rotated by
360°.
• If necessary, you can fold the foot up to 90° to the front or back.
•
With the magnet you can fix the product to a metallic surface. Make sure that the product
does not fall.
Hook
Magnet
Foot
Care and cleaning
• Never use aggressive detergents, rubbing alcohol or other chemical solutions, as these may
damage the housing or cause the product to malfunction.
• Do not immerse the product in water.
• The product does not contain any components that require maintenance. Never attempt to
open or disassemble it.
• Do not press too hard on the housing, as this can lead to scratch marks.
•
Use a dry, lint-free cloth to clean the product. Moisten the cloth slightly with lukewarm water
if necessary.
Disposal
Electronic devices are recyclable waste and must not be placed in household
waste. At the end of its service life, dispose of the product according to the relevant
statutory regulations.
You thus fulfil your statutory obligations and contribute to the protection of the
environment.
Technical data
Rechargeable battery
................... 3.7 V rechargeable lithium-polymer battery, 1500 mAh
Charging current ........................... max. 1 A
Number of LEDs ........................... 5
Light flux
....................................... 260 lm (full power), 100 lm (dimmed)
CRI
............................................... 80
Colour temperature ....................... 6500 K
Cable length ................................. 1.5 m
Light ON time ................................ 4 h (full power), 8 h (dimmed)
Charging time ............................... 2.5 h
Protection class ............................ IP54
Ambient temperature .................... -10 to +40 °C
Dimensions (L x W x H) ................ 65 x 35 x 130 mm
Weight .......................................... 165 g
