14
ON/OFF SWITCH
1. To turn the tool ON, slide the ON/OFF
switch (1) toward the front of the tool
(Fig. 5).
2. To turn the tool OFF, slide the
ON/OFF switch toward the rear of the
tool.
For safety reasons, the operator must
read the sections of this Owner’s
Manual entitled “GENERAL SAFETY
WARNINGS”, “POWER TOOL
SAFETY”, “SPECIFIC SAFETY RULES”
and “SYMBOLS” before using this
multi-function power tool.
Verify the following every time the
multi-function power tool is used:
1. Safety glasses, safety goggles, or
face shield are being worn.
2. Hearing protection is being worn.
3. The blade or sandpaper is in good
condition.
4. The accessory is properly
tightened onto the accessory
holder of the tool.
Failure to observe these safety rules
will significantly increase the risk of
injury.
WARNING
!
ASSEMBLY AND OPERATING
Fig. 5
Summary of Contents for 241-8501
Page 11: ...11 CONTENTS ...
Page 20: ...20 EXPLODED VIEW ...
