Tool Shop 241-8501, Owner'S Manual

Page: 7 / 23

7
WARNING:
Know your multi-
function power tool. Do not plug the
tool into the power source until you
have read and understand this
Instruction Manual. Learn the to
ol’s
applications and limitations, as well as
the specific potential hazards related to
this tool.
Following this rule will reduce the
risk of electric shock, fire, or serious injury.
Always wear eye protection.
Any power tool can throw
foreign objects into your eyes
and cause permanent eye
damage. ALWAYS wear safety goggles
(not glasses) that comply with ANSI safety
standard Z87.1. Everyday glasses have
only impact resistant lenses. They ARE
NOT safety glasses.
WARNING:
Glasses or goggles
not in compliance with ANSI Z87.1
could cause serious injury when they
break.
Always keep hands out of the path of the
saw blade. Avoid awkward hand positions
where a sudden slip could cause your
hand to move into the path of the saw
blade.
Secure workpiece. Use clamps or a vice to
hold the workpiece. It is safer than using
your hand and it frees both hands to
operate the tool.
Make sure there are no nails or foreign
objects in the part of the workpiece to be
cut or sanded.
To avoid injury from accidental starting,
always remove the plug from the power
source before installing or removing an
accessory.
Never use dull blades in the tool. They will
cut slower, leave rough cuts and break
easily due to added pressure and
excessive heat. They will also overload the
motor and cause premature failure of the
tool.
Never use damaged or bent blades. They
will be brittle and break easily possibly
causing injury to the operator.
Never touch a saw blade immediately after
using the tool. The blade will be extremely
hot and will burn your hand.
Only use accessories designed for use
with this tool.
SPECIFIC SAFETY RULES
!
SAVE THESE INSTRUCTIONS FOR REFERENCE
!