Use Maintenance Mode to make changes to the name database
or to set the clock. See your installer or system administrator for
other Maintenance Mode options.
To enter Maintenance Mode:
a
Press the MAINT button.
The main Maintenance Mode screen will be
displayed.
All menus other than the Maintenance Main
Menu are identified in the upper right corner.
If the screen below is not shown, press the
EXIT button (Hold Loop button 6) until you
see the Maintenance Main Menu screen.
A menu is shown on the bottom line of the display. Press the Hold
Loop button directly below a menu option to select the option.
Names and numbers are entered with the dial pad.
To exit Maintenance Mode:
a
Select EXIT from the menu until the console
returns to normal call processing mode.
or
Press the MAINT button to temporarily exit
Maintenance Mode. Press the MAINT button
again to return to the same Maintenance
Mode screen. This allows you to answer a
call, then resume console programming where
you left off.
2/00
Console Setup
MAINTENANCE MAIN MENU
NAMES TIME STATS SETUP DIAG EXIT
Tone Commander 2260d Attendant’s Guide
21
