Call Release
To release (disconnect, or hang up) a call:
The call to be released must be active on line
1 of the display.
a
Press the RELEASE button.
If there is a second party active on line 2 of
the display, they will remain on hold and move
to a Hold Loop button with “NXF” displayed.
Call Originating
To place an outside call:
a
Press the ORIGINATE button, then dial the
number with the dial pad. The digits entered
will appear in the display.
or
a
Press an autodial button (a spare DSS button
that has been programmed with the desired
number).
To call a station:
a
Press the DSS button for the desired station.
or
a
Press the ORIGINATE button, then dial the
station number with the dial pad.
2/00
16
Tone Commander 2260d Attendant’s Guide
