Conference Calls
To set up a conference call:
a
Press the ORIGINATE button and establish
the first call (or answer a ringing call). It will be
shown on line 1 of the display.
a
Press the CONF* button and establish the
second call. The first call will move to line 2 of
the display.
a
After the second called party answers, press
the CONF button again to join all parties in a
conference call.
a
To add an additional party to the conference,
press the CONF* button, then dial. After the
party answers, press the CONF button again
to join all parties.
a
If you need to remove the last party added,
press the DROP button.
Press the RELEASE button to remove the
console from the conference. The parties will
remain connected.
2/00
Note
: The 2260d must be properly configured for multiparty conference
in the telco central office for this feature to operate. Conferencing more
than three parties is not available on some central offices.
*
Lucent 5ESS Custom ISDN
: Press the
ORIGINATE button instead of the CONF
button before adding parties to the
conference call.
18
Tone Commander 2260d Attendant’s Guide
