To place an intercom call:
a
Press the INTERCOM button if your system
has a single intercom group, or press the
INTCOM button for the desired intercom
group.
Dial the number of the station you want to call
with the dial pad.
Priority Calls
The priority feature originates a call-waiting call to a station. If the
station is busy, the user will hear a call waiting tone. They can
then hookflash to answer your call.
To initiate a priority call:
a
Press the PRIORITY button
(instead of the ORIGINATE button).
You will hear a confirm tone.
If you were connected to a call, it will move to
line 2 of the display.
a
Press the called party’s DSS button, or dial
the call with the dial pad.
You will hear ringback; the called party will
hear a call waiting tone. You may press the
CONNECT button at this time for an un-
screened transfer.
If screening the transfer, you will be
connected to the called party when they flash
their hookswitch to accept the call.
a
Proceed with transferring the call as explained
on page 11.
2/00
Note
: Both the 2260d and called station lines must be properly
configured in the telco central office for this feature to operate. This
feature is only supported with Lucent 5ESS Custom ISDN.
Tone Commander 2260d Attendant’s Guide
17
